Wednesday, September 16, 2009

Bus Bridge

There are some significant barriers for bicyclists trying to get around Fairfax County. Most of the Beltway crossings have no dedicated bike access. Experienced cyclists can ride in the road using Effective Cycling techniques, which in most cases means taking the lane where it is too narrow for motorists to pass. This takes training and practice and to put it mildly, can be a challenge during rush hour.

There's another way to overcome these barriers, what one FABB members calls a bus bridge for cyclists. An example is Leesburg Pike (Rt 7) crossing the Beltway in the Tysons area. There are no direct alternative bike routes to get from one side of the Beltway to the other without a long detour. However, the 28 buses travel along Route 7, and now that all Fairfax Connector and Metrobuses have bike racks, they can be used as a bus bridge. For the above trip, it will cost $1.25 to take the bus bridge across the Beltway.

To find out how to use the bus bridge, go to the WMATA website and use the Trip Planner to enter origin and destination points and time of travel. When you know the bus number, you can also use Next Bus to find out when the next bus will arrive.

Wouldn't it be nice if bicyclists could get a discount for using the bus bridge for these short trips?


Comments: Post a Comment
Contact FABB via email:

Subscribe to the
FABB e-newsletter

Subscribe to
Posts [Atom]

  Bike to Work Day 2004 at Reston Town Center

  Transportation choices

This page is powered by Blogger. Isn't yours?


February 2007
March 2007
April 2007
May 2007
June 2007
July 2007
August 2007
September 2007
October 2007
November 2007
December 2007
January 2008
February 2008
March 2008
April 2008
May 2008
June 2008
July 2008
August 2008
September 2008
October 2008
November 2008
December 2008
January 2009
February 2009
March 2009
April 2009
May 2009
June 2009
July 2009
August 2009
September 2009
October 2009
November 2009
December 2009
January 2010
February 2010
March 2010
April 2010